Gujarat makes most of the pumps used in farming, domestic water supply and light industry. The core range is borewell and openwell submersibles, monoblock pumps and centrifugal pumps, with solar pumps and pressure boosting pumps growing alongside.
Most makers specialise. A plant that builds good borewell submersibles may buy in its monoblocks or not offer them at all, so ask what each factory makes itself.
The main product families
- Borewell submersible pumps: slim vertical multistage pumps with a motor below, sized to fit inside a borehole.
- Openwell submersible pumps: horizontal units that sit at the bottom of an open well or sump.
- Monoblock pumps: a surface pump and motor on one shared shaft, used for lifting from shallow sources and for transfer.
- End-suction centrifugal pumps: a pump on its own bearing frame, coupled to a separate motor or engine.
- Self-priming and jet pumps: small domestic pumps for homes, gardens and shallow wells.
- Pressure booster sets: one or more pumps with a pressure tank or controller to keep water pressure steady.
- Solar pumps: submersible or surface pumps driven by a controller from a solar array.
- Sewage, dewatering and some process pumps from a smaller group of makers.
Motors come with the pump
Most Gujarat pump makers also build the motor. Borewell motors are usually water-filled and often rewindable, which suits markets where local repair shops rewind motors instead of replacing them. Oil-filled motors are also made. Surface pumps use air-cooled induction motors, single-phase or three-phase.
Many plants also sell motors on their own. Our article on industrial motors made in Gujarat covers that range.
Choosing which family you need
The water source decides most of it. A borehole needs a borewell submersible sized to its diameter. An open well or tank suits an openwell submersible or a monoblock. Irrigation canals and transfer jobs often use monoblock or end-suction pumps. The differences are explained in submersible, monoblock and centrifugal pumps compared.
Power supply comes next. Single-phase or three-phase, 50 Hz or 60 Hz, and grid or solar all change the motor and the controller. Then comes the duty point: the flow you need at the head you need.
Check what the factory really makes
Catalogues from Gujarat often show every pump family on one page. That does not mean one plant makes them all. Ask which parts are cast, machined, wound and tested on site, and which models are bought in from other makers.
A plant that makes its own motors and runs its own test bench has more control over quality than one that assembles bought-in parts. If you plan to sell several families, you may need two or three makers, each strong in its own range.
Next step
Send us your application, power supply and target market, and we will shortlist makers that build that pump type themselves. We audit the plant and its test bench before you place an order. Book a free sourcing review.