The price of a CNC lathe from Rajkot depends mainly on its size, the quality of its structure, and the bought-in parts: controller, servo and spindle drives, spindle bearings, ball screws and guideways. Accessories, export compliance, packing and after-sales support add the rest.
Two lathes with the same swing can be priced far apart for good reasons. To compare quotes fairly, you need to know what sits inside each one. A real quote comes from matching your parts and market to a specific machine.
The machine itself
- Size and weight: a larger swing, longer turning length and heavier castings use more material and machining time.
- Bed design: a slant bed with a one-piece casting usually costs more than a flat bed, and gives better chip flow and rigidity.
- Castings: good grey iron, proper stress relief and accurate machining of the castings add cost and improve long-term accuracy.
- Spindle: the bearing class, spindle bore, speed and motor power in kW all move the price.
- Assembly: hand scraping, careful alignment and laser compensation take skilled hours that cheaper makers skip.
Bought-in components
These parts are often a large share of the cost, and their prices are set by their own makers, not by the Rajkot workshop. They include the following:
- The CNC controller and its software options, covered in CNC controllers.
- The servo motors, spindle motor and drives, which may come from the controller maker or another supplier.
- The ball screws and linear guideways, where precision class and brand make a real difference.
- The turret, hydraulic chuck, tailstock and hydraulic power pack.
- Electrical parts, such as contactors, relays, cables and the panel cooling unit.
Options and accessories
Chip conveyors, bar feeders, tool holders, a part catcher, a steady rest, a live tooling turret or a sub-spindle all change the price. Some quotes include them and others list them as extras. Ask for an itemised list, as explained in accessories with Indian machine tools.
Export and commercial factors
- Compliance work, such as CE documentation, enclosure guarding and an IEC 60204-1 or NFPA 79 panel, adds engineering time and parts.
- Electrical changes for 60 Hz or a different voltage can mean different motors or a transformer.
- Export packing with VCI wrapping and an ISPM 15 crate costs more than domestic packing.
- Installation, training and spares included in the quote raise the headline number but may lower your total cost.
- The Incoterm changes what the price covers. Our article on FOB, CIF or DAP explains the difference.
- Currency movements and steel prices also shift quotes over time, so check the validity period.
Why the lowest quote can cost more
A low quote often means lower-grade bought-in parts, thinner castings or less time spent on alignment. The machine may pass a short trial and then lose accuracy within months. It may also arrive without the guarding your market needs.
Compare quotes on the same specification, with the same components and scope. Then compare the makers' testing, export record and support, not only the number at the bottom.
Next step
We put competing quotes side by side on the same specification, check what is really fitted and agree one written fee with you in advance. To get a real quote for your lathe, book a free sourcing review.